Quicke Q-Companion BT Originalbetriebsanleitung Seite 33

3.1.8. Tare
If you want to weigh material that is inside a container and you don't want the weighing result to include the weight of the
container, you can use Tare.
To exclude the weight of the container in the weighing
results, first make sure the weighing mode is set to Manual,
and then do a weighing lift with the empty container. When
the lift is done and you are promted with an action, press
Tare.
The result from the following weighing lifts will not
include the weight of the container, but only the weight of
the material inside the container.
The tare-symbol will indicate that taring is active.
To remove the tare, press Weight settings and Remove tare.
0
bucket / gravel
The tare will automatically be removed when selecting a different implement.
14:56
magnus
Auto
13
43
79000
51625
1575
kg
0
bucket / gravel
Fig.45 Tare
0
bucket / gravel
Fig.46 The tare-symbol
Weight settings
Remove last weight
Remove tare
Clear sum
Target weight
Fig.47 Remove tare
31
14:56
magnus
Man
13
43
79000
51625
1575
kg
14:56
magnus
Auto
13
43
79000
51625
1575
kg
Operation