Quicke Q-Companion BT Originalbetriebsanleitung Seite 20

Setup
2.2.9. Delete load weighing calibration
To delete a load weighing calibration, enter Implement view, select the active implement and then Weighing calibrations. The
list of available calibration is shown.
Note. All the activities that were recorded while using the calibration will be deleted unless the activities are exported to the
mobile app
Weighing calibrations
cal.1
cal.2
gravel
New calibration
1. Select which calibration you want to delete.
2. Select Delete and press confirm.
Fig.17 Delete load weighing calibration
18
gravel
Select
Edit name
Calibrate
Delete