Quicke Q-Companion BT Originalbetriebsanleitung Seite 30

Operation
3.1.4. Weight presentation
After a successful weighing lift, you are presented with the
measured weight of the load.
In Weighing mode - Automatic the measured weight is
automatically added to the accumulated sum, subtracted
from the target weight (if active) and the weighing lift
counter is increased.
In Weighing mode - Manual you will be presented with four
options when the weighing lift is done:
- Discard the measured weight and continue.
- Tare the system with the measured weight.
- Subtract from the accumulated sum.
- Add to the accumulated sum.
The measured weight is automatically discarded if none of
the above actions are taken and you lower the loader below
the weighing range.
For more information, see chapter 3.1.3. Weighing mode.
3.1.5. Weight accumulation
In the Weighing view you are presented with an
accumulated sum and a counter. The sum and the counter
is automatically adjusted when a weight is added or
subtracted.
The accumulated sum is stored in non-volatile memory
during power off and is restored when the system is
powered on.
You can clear the accumulated sum and counter by entering
Weight settings and select Clear sum.
magnus
0
43
bucket / gravel
Fig.37 Weight presentation
magnus
0
43
bucket / gravel
Fig.38 Weighing mode
magnus
0
43
bucket / gravel
Fig.39 Weight accumulation
28
14:56
Auto
13
79000
51625
1575
kg
14:56
Man
13
79000
51625
1575
kg
14:56
Auto
13
79000
51625
1575
kg