Weighing Mode - Quicke Q-Companion BT Originalbetriebsanleitung

• Adjust engine speed so that it corresponds to the speed
used when calibrating the implement.
Pull the joystick straight back with full deflection and
•
lift smoothly at a constant speed through the weighing
range.
• When the loader gets above the Weighing range with
a successful weighing lift, there is a sound indication
(beep) and the weight is presented.
A weighing lift is not accepted and no weight is shown if:
- The lift was too slow.
- The lift was too fast.
- The loader was not below the weighing range
when the lift was started.
- The implement angle was incorrect during the
lift.

3.1.3. Weighing mode

The weighing mode can be set to Manual or Automatic.
In Manual-mode, you need to manually add the measured
weight to the accumulated sum.
In Automatic-mode, the measured weight is automatically
added to the accumulated sum.
The weighing mode indicator shows the active mode.
Automatic
To change weighing mode, press the Select weighing mode.
Fig.34 When a successful weighing lift is performed, the weight
is presented on the display.
Manual
Fig.35 The weighing mode indicator
Fig.36 Select weighing mode-button.
27
magnus
0
43
1460
bucket/ gravel
magnus
0
43
1575
bucket / gravel
magnus
0
43
79000
51625
1575
bucket / gravel
Operation
14:56
Auto
14
77540
53085
kg
14:56
Auto
13
79000
51625
kg
14:56
Auto
13
kg