Navigating The Menus; Setting Up The Watch - Timex Ironman Sleek 150 Benutzerhandbuch

MAIN ( )
•
Opens the main menu, selects a highlighted menu item, or selects the next screen item.
BACK ( )
•
Returns to the previous level in the menu. Press repeatedly to return to the Time-of-Day
display. Press and hold for four seconds to enter/exit Power-Saving mode.
UP / DOWN ( )
,
•
Scrolls to select from displayed items, or rotates through available selections.
®
INDIGLO NIGHT-LIGHT (
•
Press to activate the display's INDIGLO
•
Press and hold for four seconds (the watch beeps) to activate (or deactivate) Night Mode
feature in which any button press turns on the night-light for several seconds.
•
Press and hold for ten seconds to turn the night-light off.
DOT-MATRIX LCD DISPLAY WITH TAP SCREEN™ TECHNOLOGY (
•
Tap the display with one or more fingers to start or stop timing when using the watch's
Chronograph, Interval Timer, or Timer.
STATUS INDICATORS
Various status indicators appear in the watch display according to current function.
Row 1: (left to right): Chronograph, Timer Hourglass,
Alarm Clock, Target Timer, Drink Timer, Eat Timer,
Lock/Unlock.
Row 2: (left to right): Page Scroll, Run, Stop, Lap, Tap.
POWER-SAVING MODE
Press and hold BACK (
off in this mode, but press any key to see the Time-of-Day display for several seconds.

NAVIGATING THE MENUS

1. Press MAIN to open the watch's main menu.
2. Press UP or DOWN
3. Press MAIN to select the highlighted item.
4. Press BACK to exit, finish, or return to the previous menu
(depending on the operation), or press repeatedly to return to the
Time-of-Day display.

SETTING UP THE WATCH

Before you can use your watch, you need to set the time and date, and can also configure other
watch behaviors.
1. Press MAIN to open the watch's main menu.
2. Use DOWN to highlight SETUP, and press MAIN
3. Press MAIN to select TIME, press MAIN
once more to select TIME.
NOTE: You can set TIME 2 to a different time zone, and toggle between time zones by pressing
and holding UP
4. Use UP and DOWN
4
)
®
night-light for several seconds.
) for four seconds to enter (or exit) Power-Saving mode. The display is
to highlight menu items.
.
to set the hour, then press MAIN
to select.
again to select TIME 1, then press MAIN
to highlight minutes.
®
,
)