Specifications - Makita DLS600 Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Blade diameter
Hole (arbor) diameter
Max. miter angle
Max. bevel angle
No load speed
Laser type
Dimensions (L x W x H)
Rated voltage
Standard battery cartridge
Charger
Net weight
Max. Cutting capacities (H x W) with blade 165 mm
45° (left and right)
•
Due to our
the specifications
notice.
•
Specifications and
country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and
heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Miter angle
0°
continuing program
herein
battery cartridge
Left 45° (46° when using release lever), Right
45° (46° when using release lever)
Red Laser 650 nm, Maximum output
)
340 mm x 400 mm x 440 mm
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
45° (left)
30 mm x 92 mm
30 mm x 65 mm
of research
are subject
may differ
Read instruction manual.
To
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
Do
blade.
Never look into the laser beam. Direct laser
beam
Only for EU countries
Ni-MH
17 ENGLISH
DLS600
165 mm
20 mm
Left 52°, Right 52°
-1
5,000 min
1.6mW ( Laser Class 2M
D.C. 18 V
6.3 - 6.6 kg
Bevel angle
0° 45° (right)
46 mm x 92 mm 15 mm x 92 mm
46 mm x 65 mm 15 mm x 65 mm
and development,
to change without
from country to
avoid injury
flying debris,
not place
or fingers
may injure
your eyes.
from
keep
hand
close