Makita DLS600 Betriebsanleitung Seite 32

used, loosen the screw and turn the set plate out of the
way.
Carrying tool
WARNING:
Stopper pin is only for carrying
and storage purposes and should never be used
for any cutting operations. The use of the stopper
pin for cutting operations may cause unexpected
movement of the saw blade
kickback
injury.
CAUTION:
Always secure all moving portions
before carrying the tool. If portions of the tool move
while being carried loss of control or balance may
occur resulting
1. Remove the battery cartridge.
Secure the blade at 0° bevel angle and the turn
2.
base at the full right miter angle position. ►
Fig.50: 1. Turn base
3. Lower the handle fully and lock it in the lowered
position by pushing in the stopper pin.
Carry the tool by holding the handle. ► Fig.51
4.
resulting in
and serious personal
in personal injury.
32 ENGLISH