Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.4. Capacitance measurements
Warning !
To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any
capacitance measurements. Remove the batteries and
unplug the line cords.
1. Set the function switch to the corresponding CAP
measuring range.
2. Plug the black test lead into your meter's COM-terminal
and
(-)
mA-terminal (+).
3. Touch the test leads to the capacitor to be tested. The
display will indicate the proper decimal point value.
6.5. Inductance measurements
1. Switch to a proper range and insert test leads into "mA"
and "com" jack.
2. Connect the test leads crossty to the two ends of
inductor.
Notes:
1. If inductance exceeds the range selected. "OL" will be
displayed on LCD, the you shall increase the range by
on step.
2. The inductance value measured for identical inductor
may be different if there is different impendence.
the
red
test
lead
into
51
your
meter's
Werbung
