Initial Use - Beurer BC 54 Gebrauchsanweisung

Information on the display:
1. Risk indicator
2. Symbol for Bluetooth
3. Time and date
4. Systolic pressure
5. Diastolic pressure
6. Calculated pulse value
7. Cardiac arrhythmia symbol
Pulse symbol
8. Battery status indicator
9. Release air
10. User memory /
11. Memory space number/memory display
average value ( A A ) , morning ( AM
1 2
11
10
9
8
7
6
transfer
®
AM ) , evening ( PM PM )
3
4
5

6. Initial use

Inserting the batteries
• Remove the battery
compartment lid on
the left side of the
device.
• Insert two 1.5 V AAA
micro (alkaline type LR03) batteries. Make sure that the
batteries are inserted the correct way round. Do not use
rechargeable batteries.
• Close the battery compartment lid again carefully.
Now set the date and time as described below.
If the battery change symbol
appears, no further measurements are possible and you
must replace all batteries. Once the batteries have been
removed from the device, the date and time must be set
again. Any saved measured values are retained.
Making settings
You must make sure that the device has the correct set-
tings before use in order to be able to make full use of
all functions. Only by doing so can your measurements
with associated date and time be saved and accessed
later by you.
30
is flashing and
4