Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
(10)
(11)
(12)
The control panel
(10) Sensor
for turning the appliance
on/off
(11) Sensor
for turning the beeping
sound on/off
(12) Sensor
for selecting the
temperature zone (upper/lower)
(13) Sensor
for selecting the
temperature indicator (actual/target)
(14) Temperature indicator for the
temperature zone (upper)
(15) Temperature indicator for the
temperature zone (lower)
(16) Sensor
for increasing the
temperature
(17) Sensor
for reducing the
temperature
(18) Sensor
for changing the
C
F
temperature unit (Celsius/Fahrenheit)
(19) Sensor
for turning the lighting
on/off
Before getting started
• Read the "Safety" chapter from
page EN-4.
• Set up and connect the appliance as
described in chapter "Start-up" from
page EN-18.
(13)
(14)
22
23
C
Operation
(15)
(16)
(17)
C
Signal tones
Each time you press one of the sensors num-
bered (10) to (13) and (16) to (19), you will
hear a beep. This tells you that the appliance
has registered your input.
• Touch the sensor
beeping sound on or off.
Touch any one of the sensors on the
control panel to deactivate the alarm in
the event of a malfunction.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
The temperature indicators (14) and (15)
will show the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Page EN-11
(18)
(19)
C C F
(11) to switch the
Werbung
Kapitel
Inhaltsverzeichnis
