Operation; The Control Panel; Before Getting Started; Key Tones - hanseatic JCF-145S Gebrauchsanleitung

Page GB-10

Operation

Operation

The control panel

(9) (10)
(9)
Switch Wine refrigerator on/off
(10)
Switch light on/off
(11)
Select temperature zone (top/bot-
tom)
(12)
Temperature indicator

Before getting started

– Read the „Safety" chapter from page GB-5.
– Set up and connect the appliance as de-
scribed in the „Start-up" chapter from page
GB-17.

Key tones

Each time you press one of the keys num-
bered (9) to (11) and (13) to (15), you will hear
a beep. This tells you that the appliance has
registered your keypress.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
A beep will sound.
The temperature indicator
show the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
(11) (12)

Switching on

• Press the

Switching off

• Press the
(12) will
(13)
(13)
Increase temperature
(14)
Reduce temperature
(15)
Change temperature unit between
C
F
Celsius and Fahrenheit.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
key (9).
A beep will sound.
The temperature indicator (12) will show
the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
key (9).
The temperature indicator
shut off.
The compressor will not work and the ap-
pliance will stop cooling. The appliance is
switched off.
(14) (15)
C
F
(12) will