Changing The Temperature Unit; Led Light; Interior Equipment; Removing The Shelves - hanseatic HWC171GCIA Gebrauchsanleitung

After a short while the flashing will stop and
the desired temperature will be set.
The appliance will adjust itself to the set tem-
perature while showing the current internal
temperature.
If you set a lower temperature, you will
need higher cooling performance. This
increases the energy consumption.
Changing the temperature
unit
You can choose whether you want the inter-
nal temperature to appear in Celsius or Fahr-
enheit.
You can find out the current setting by looking
at the temperature unit shown on the display
to the right of the temperature indicators (14)
and (15).
• To change the temperature unit, touch the
sensor (18) for 3 seconds.
C
F

LED light

• To switch the LED light on or off, touch
the sensor (19).
Operation

Interior equipment

The bottle shelves (6) can be removed.

Removing the shelves

(20) (21) (22)
(23)
• Lift the rear of the bottle shelf (6) slightly
and pull it out.
In doing so make sure that the spacers (20)
slide into the guide rails (21).
Inserting the shelves
1. Rotate the bottle shelf (6) in such a way
that the front rail (23) and back rail are
facing upwards.
2. Insert the bottle shelf (6) into the side
brackets and slide it all the way back.
In doing so make sure that the spacers (20)
slide into the guide rails (21).
Page EN-13
(21) (20)
C
F
(6)