中文
EN DE
RU
KO
PT
JA
ES
AE5601
Chapter VI Handling
Since the wheel aligner is a high-precision electronic measuring instrument, the following requirements shall be noted during handling:
1.The wheel aligner shall be handled gently with the use of special handling tools ( such as forklift).
2.Be careful not to shake the wheel aligner fiercely during handling.
3.The electronic equipment shall be well protected against moisture, dampness, high temperature, etc. Always cover the loaded wheel aligner with
waterproof cloth.
(Note: The maximum load capacity of the forklift shall be greater than 0.5 t.) (The figure shown above is for reference only.)
67