Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.7
Incomplete charge
The "stall charge" message appears automatically
after the station has performed 3 attempts of forced
charging with negative result. When the message ap-
pears:
1. Make sure that the connections are firm and that
the quick connectors are properly connected.
2. Select
to repeat 3 forced charging cycles or
select
to use the A/C system of the vehicle
to end the charging, following carefully the follow-
ing procedure:
$
Close the valve of the high pressure hose con-
nection turning the ring nut counterclockwise
and confirm with
$
Turn on the vehicle and the A/C system on the
vehicle.
$
Select
to continue.
$
Close the valve of the low pressure hose connec-
tion turning the ring nut counterclockwise and
confirm with
.
$
Turn off the A/C system and the vehicle.
$
Select
to continue.
$
Disconnect the service hoses from the vehicle
A/C system.
"
The charge is terminated.
Robert Bosch GmbH
.
Instructions for use | ACS 753 | 61 |
6.8
Database
6.8.1
Vehicle database
Specific data on the filling amount of vehicle submit-
ted to maintenance operations can be recalled directly
from the R134a database.
i
In this menu it is possible to select the vehicles in
the vehicle database with all relevant data.
1. Call up the Main Menu.
2. Select
.
3. Select
.
4. Select European Database.
5. Follow the instructions on the display to obtain the
data related to the vehicle.
"
The vehicle is selected.
i
Use the Up or Down arrow buttons to change the
displayed item and select
!
Refer to the station on-line guide with
mation on how to use it.
6.8.2
Personal vehicle database
It is possible to create a personal database where to
directly enter data for new vehicles that are not in the
standard database.
i
Five rows (brand, model, type, oil and refrigerant)
are available for entering new vehicle data.
1. Call up the Main Menu.
2. Select
.
3. Select
.
4. Select Personal Database.
5. Select among:
$
Select the vehicle
$
Enter new vehicle
$
Clear vehicle
6. Follow the instructions on the display.
i
Use the Up or Down arrow buttons to move to the
next or previous input field and select
the data entry.
!
Refer to the station on-line guide with
mation on how to use it.
en
to confirm.
for infor-
to save
for infor-
|
1 689 989 612
2020-12-01
Werbung
Kapitel
Inhaltsverzeichnis
