Arjo RIK Overlay Bedienungsanleitung Seite 7

Assembly of the RIK Overlay (continued)
3. Place the black bottom center pad on the center of the bottom panel. Align
the nylon hook and loop material sides of the center pad with the black side
wings of the bottom panel and fold the wings upward on each side so that
the nylon hook and loop material mates (Figure 2).
Figure 2
4. Repeat the previous procedure with each blue bottom end pad so that all
three pads are attached to the bottom panel (Figure 3). Ensure that the blue
bottom end pads sit snugly against the black bottom center pad. Fold the
wing at the HEAD end of the bottom panel upward, and tightly fasten the
nylon hook and loop straps on each side to the adjacent side wings (Figure
3 magnified view).
Figure 3
Center Pad
Magnified view of corner
7