Warning And Notice Signs En; Emergency Information En; Product Description; Technical Data En - Abicor Binzel xFUME FLEX Betriebsanleitung

3 Product description

2.7 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
2.8 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
Burning oil or emulsions must be extinguished using a CO
3 Product description
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.
3.1 Technical data
3.1.1 Fume extraction system
Connection voltage
Drive power
Rated frequency
Primary filter surface area
Pre-filter surface area
Air inlet
Air outlet
Max. air volume flow
Sound pressure level LpA
Weight of extraction system incl. extraction arm
Dimensions of extraction system (l × w × h)
Length of extraction arm
Tab. 1 General information
EN - 6
Meaning
Pull out the mains plug.
Wear a respiratory mask.
The extraction arm can be swiveled to a max. of 350°.
2
or powder fire extinguisher.
115 V
1.1 kW
50/60 Hz
36 m²
0.43 m²
Ø = 170 mm
310 × 142 mm
1200 m³/h
≤ 72 dB(A)
120–129 kg
700 × 700 × 1095 mm
2000/3000/4000 mm
xFUME FLEX
230 V
50 Hz
BAL.0733.0 • 2020-12-04