Warning And Notice Signs En; Emergency Information En; Product Description; Technical Data En - Abicor Binzel FES-200 W3 Betriebsanleitung

FES-200 W3
2.7 Warning and notice signs
The following warning and notice signs can be found on the product:
Symbol
2.8 Emergency information
In the event of an emergency, immediately disconnect the following supplies:
• Power
Further measures can be found in the power source operating instructions or the documents for further
peripheral devices.

3 Product description

Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS 1203).
3.1 Technical data
Connection voltage
Drive power
Rated frequency
Filter surface
Connector diameter
Max. vacuum
Min. vacuum
Max. air volume flow
Min. air volume
Sound pressure level LpA
Max. air pressure
Weight
Dimensions (LxWxH)
Tab. 1
Ambient temperature
Relative humidity
Tab. 2
Meaning
Read and observe the operating instructions!
WARNING
1
General information
1Measured according to the enveloping surface method according to DIN EN ISO 3744
Ambient conditions during operation
3 Product description
230 V 115 V
1.0 kW
50 Hz 60 Hz
2
0.8 m
50 mm
19,000 Pa
14,500 Pa
200 m³/h
50 m³/h
65 dB(A)
4 bar
24 kg
630 x 210 x 590
+5°C to 25°C
Up to 90% at 20°C
EN - 9