Leica DMLS Bedienungsanleitung Seite 27

Total magnification
Total magnification = objective magnification x
eyepiece magnification.
If using the magnification changer (→ p. 48),
multiply the set magnification factor, e. g. 1.5x,
as well.
Useful magnification
The total magnification of a light microscope is
subject to physical limits known as the useful
magnification. This is roughly a thousand times
the aperture of the objective.
Examples:
Objective
10x/0.22
10x/0.22
40x/0.60
40x/0.60
40x/0.60
In the last example, therefore, the "Useful
Magnification" has been exceeded, which may
result in blurred images.
Object field diameter
If you divide the eyepiece field of view number
by the objective magnification, you obtain the
true diameter of the observed object field. The
eyepiece magnification is not taken into account
in the calculation. With the 10x/25 eyepiece and
a 50x objective, for example, an object field of
25 : 50 = 0.5 mm can be surveyed.
Downloaded from www.Manualslib.com
Eyepiece Magnification
changer
10x/20 –
10x/20 2x
10x/20 –
10x/20 1.5x
10x/20 2x
manuals search engine
If the tube factor (TF) is other than 1x, the result
must be divided by the tube factor as well.
In the above example, the object field would be
0.5 :1.5 = 0.33 mm with TF = 1.5.
Simple survey magnification
Use a 4x, 5x or 10x objective. Hold specimen over
the light exit in the microscope base instead of
putting it on the stage. If the 2.5x lens (con-
denser disc) is in the light path, disengage it.
!
Caution!
Do not cause any scratches!
Total Upper limit
magnification of useful
magnification
100x 220x
200x 220x
400x 600x
600x 600x
800x 600x
Focus by adjusting the height of the stage (23.5)
or the condenser (23.3).
Although this method does not claim to produce
a good image, it offers the advantage of great
field depth, e. g. for fast scanning of series of
specimens in a similar way to a magnifying
glass. If the photomicrographic equipment does
not comprise a data reflection facility, a labelled
piece of foil or paper can be copied onto the
beginning of the film, for example, to enable
identification in the photo lab.
Comment
not exceeded
not exceeded
not exceeded
not exceeded
exceeded
27