Leica DMLS Bedienungsanleitung Seite 16

Light trap*
Put the metal plate (25.5) between the two stage
plates (31.11). For fluorescence only.
Adjustment lens*
Screw the adjustment lens (14.4) for adjustment
of the fluorescence lamp → p. 40, into the
nosepiece in place of an objective.
Photomicrography*
In general a trinocular tube (Fig. 35 and 37), a
PHOTO eyepieceadapter tube (36.4) and HC
PHOTO eyepieces with a fitting diameter of
27 mm are necessary for the adaption of photo-
micrographic devices. Unless the photomicro-
graphic equipment is fitted with a special
viewing port with format outlines, HC PLAN M
eyepieces, i. e. with focusable eyelens (5.4) and
inserted photo graticule have to be used in the
binocular port. See the manual supplied with the
photographic equipment for further details.
TV adaption*
→ p. 44
Fig. 15 Transmitted light illumination in microscope base
1 Lock, 2 Halogen lamp
16
Downloaded from www.Manualslib.com
2
manuals search engine
Lamp change transmitted light
The transmitted light illumination with low-
voltage halogen lamp is integrated in the
microscope base and accessible from the
underneath of the microscope (15.2).
Data of replacement lamp → nameplate on back
of instrument (3.1) and p. 47.
Unplug the connecting cable from the back of
the instrument (3.2).
Tilt the microscope back carefully. Push the
base flap (15.1) in the direction of the back of the
microscope and flip up.
The lamp may still be hot! Pull out lamp.
1
Attention:
Caution!