Leica DMLS Bedienungsanleitung Seite 20

!
Protect movable interior parts with foam rubber
or similar in case of shipment.
To open lamphousing 106 z: undo screws (18.4).
Pull the cut-out plug slightly out of the socket
(18.11) and flip up the lid of the lamphousing.
Undo the screws (18. 1 0) on the lamp holder and
remove the holder (Fig. 20). Remove the spent
burner by loosening the clamp screws (20. 1 and
20.3).
Fig. 20 Lamp holders for gas discharge lamps*
1 Upper clamp, 2 Seal point of the burner, 3 Lower clamp,
4, 6 Drillholes for fixing the holder, 5 Sockets for cut-out plug,
7 Protective cover
Hg 50
1
2
4
5
6
Hg 100
20
Downloaded from www.Manualslib.com
Attention:
manuals search engine
Insert burner as follows, adhering strictly to
the above safety information:
Do not remove the protective covering yet
(20.7).
Xe 75
3
Hg 100
Stab.
1
3
Attention:
1
7
3
1
3