What If There Are Problems - Beurer BM 55 Gebrauchsanweisung

Designation
Universal cuff (22-42 cm)
Mains part (EU)
USB cable

10. What if there are problems?

Error Possible cause
message
The systolic pres-
Er1
sure could not be
recorded correctly.
The diastolic pres-
Er2
sure could not be
recorded correctly.
The systolic and
diastolic pressures
are above the
measurement
range.
The systolic and
LO
diastolic pressures
are below the
measurement
range.
Item number and/or
order number
163.946
071.95
163.484
Behebung
Repeat the measure-
ment. Ensure that you
do not move or speak.
The cuff has been
Er3
fastened too tightly.
The cuff has been
Er4
fastened too
loosely.
The inflation pres-
Er5
sure is higher than
300 mmHg or the
measured blood
pressure is outside
of the measure-
ment range.
Pumping up is
Er6
taking longer than
160 seconds.
There is a system
ErA, Er0,
or device error.
Er7 oder
Er8
The batteries are
almost empty.
Unable to send the
PCEr
data to the PC.
34
Repeat the measure-
ment. Ensure that you
do not move or speak.
Reinsert the batteries
or replace with new
batteries.
Check there is a con-
nection to the PC and
repeat the process.