Mettler Toledo Excellence Referenzhandbuch Seite 13

4.2.3 XPE balance settings for Antistatic Kit
The arrow buttons can be used to page forward or back to a menu page.
1 Switch on the balance [ ].
2 Press [ ].
3 Choose Smart & ErgoSens and tap the button [Define].
ð A selection window appears.
4 Choose ErgoSens 1 (Aux1) or ErgoSens 2 (Aux2) and tap on the associated button.
ð A selection window appears.
5 Scroll and select [AntiStatic Kit].
6 To save the settings, tap [OK].
7 Choose Ionizer Setup and tap the button [Define].
8 Choose settings appropriate to your application. Recommended settings are active and 0 seconds After
door closed.
9 To save the settings, tap [OK].
ð Indicator light turns on and Status-Icon [ ] appears in the display when the ionizer is working.
Compact Antistatic Kit Installation and Putting into Operation​ ​ 9