E-Zoom - Epson EasyMP EMP-735 Aufstellungsanleitung

Disconnect
Connection
status
indicator
Exit
Minimise

E-Zoom

Clicking the "E-Zoom" icon displays the following setting screen allowing you to
modify the zoom magnification and position.

E-Zoom

Cancel
E-Zoom
Position
Ends the current network communication connection
between the projector and computer.
Continuously flashes the top, middle, and bottom
indicators in sequence as long as the computer and
projector are connected through the network. This light
goes out when no connection is possible.
This terminates the current network connection with the
projector, and closes EMP NS Connection.
This minimises the toolbar and displays it as a button in the
Windows taskbar.
Position
Projector
This adjusts the E-Zoom magnification. Click the "+" button to
enlarge. Click the "-" button to reduce the effect of the zoom.
This is the same as the [
control.
This indicates the portion to be enlarged/reduced.
Click each of the buttons below to move in the indicated direction.
" " button: Move up
" " button: Move right
" " button: Move down
" " button: Move left
This is the same as the E-Zoom function on the projector to move
the cross and indicate the area to enlarge/reduce.
Zoom" in the EMP-735 User's Guide.
Close
] and [ ] buttons on the remote
See "E-
37