Epson EasyMP EMP-735 Aufstellungsanleitung Seite 50

1
Start Windows on the computer, then select "Start" - "Programs" (or "All
Programs") - "EMP NS Connection" - "EMP NS Connection".
EMP NS Connection starts.
2
The following Switch network screen is displayed the first time EMP NS
Connection starts after installation. Proceed with Step 4 if the Switch
network screen is not displayed.
3 Select the wireless LAN card that will be used for the connection, and
click "OK" to close the Switch network screen.
Tip :
Once the current network adapter has been selected in this Switch network screen, this
screen will not be displayed at subsequent EMP NS Connection start-ups. To change the
current network adapter, click the "Option" button in the Projector selection screen
(screen in Step 4). Clicking the "Switch LAN" button on the Option screen displays the
Switch network screen.
49