Epson EasyMP EMP-735 Aufstellungsanleitung Seite 44

Tip :
If the wireless LAN card is not inserted in the card slot on the projector, the following screen
is displayed. Insert the wireless LAN card in the card slot on the projector to display the
screen for Step 3.
4 Ensure that the "Config" button at the lower right on the screen is
selected, and press the [Enter] button on the remote control.
The Network advanced settings screen is displayed.
5 Position the cursor on "Access point mode", and press the [Enter] button
on the remote control.
This selects "Access point mode".
43