Epson EasyMP EMP-735 Aufstellungsanleitung Seite 32

3
Select the wireless LAN card that will be used for the connection, and
click "OK" to close the Switch network screen.
Tip :
Once the network adapter in use has been selected in this Switch network screen, this
screen will not be displayed at subsequent EMP NS Connection startups. To change the
current network adapter, click the "Option" button in the Projector selection screen
(screen in Step 4). Click the "Switch LAN" button on the Option screen to display the
Switch network screen.
4 Select the check box for the name of the projector that you want to
connect, and then click the "Connect" button.
The projector name is shown in the projector's Connection Stand-by screen.
The icon status meaning differs
according to colour as follows.
Grey: Not connected
Orange: Connected to another
computer
31