Epson EasyMP EMP-735 Aufstellungsanleitung Seite 52

6
A network connection is established between the computer and
projector, and the computer screens are projected by the projector.
The EMP NS Connection toolbar is displayed on the computer screen. Use the
toolbar to operate the projector, change options and settings, and disconnect
from the network.
If the toolbar is in the way during a presentation, you can minimise it. To
perform projector operations and setup using the remote control.
"Selecting the Colour Mode" and "Advanced Operations" in the EMP-735
User's Guide.
There are a number of colour and resolution restrictions for projecting images
from a computer using Network Screen. For restriction details, refer to
"Connection Restrictions".
See "Adjusting the Screen Image" and the subsequent material, in the
EMP-735 User's Guide to further adjust the projected images and perform
other functions.
Tip :
To connect to a different computer in order to replace the presenter, start EMP NS
Connection on the selected computer and connect. The connection with the current
connected computer will be terminated , and the next computer will be connected.
p.35
p.33
Toolbar
See
51