Transmitting Encrypted Data - Epson EasyMP EMP-735 Aufstellungsanleitung

Connecting in Access Point Mode

Transmitting Encrypted Data

When projecting images from a computer connected to a projector over a network,
image data can be encrypted and transmitted. Encryption of data ensures security.
However, it reduces baud rates.
Perform the following steps to use encrypted transmission.
Tip :
• Do not unplug the power cable when EasyMP is in use (screens are changing or the
access lamp on the wireless LAN card is lit green).
• Do not remove the wireless LAN card when the access lamp on the wireless LAN card
is lit green, or when connected to a network. Doing so may damage the wireless LAN
card.
1
This performs a connection setup between the projector and computer
in Access point mode.
2 On the computer select "Start" - "Programs" (or "All Programs") - "EMP
NS Connection" - "EMP NS Connection".
EMP NS Connection starts.
3 Click the "Option" button on the next screen.
56
p.24