Epson EasyMP EMP-735 Aufstellungsanleitung Seite 27

Connecting Using Easy Connect Mode
6
Press the [ ] button on the remote control to move the cursor to
"Advanced", and press the [Enter] button.
The Easy connect mode advanced settings screen is displayed.
7
Move the cursor to the selected item, and press the [Enter] button to set
that item.
The settings of each of the items is shown below.
Letters or numbers must be input depending on the item. See the "Entering
Letters and Numbers" (
Projector name Enter a name for the projector. This name is used to
Ad hoc mode
settings
ESSID
26
p.28 ) for the letter and number input methods.
identify the projector when connected to the network.
Up to 16 single-byte alphanumeric characters can be
entered.
Select the "Clear" button and press the [Enter] button on
the remote control to clear the entered projector name.
Select the ad hoc mode.
Select either "ESSID ad hoc" or "Channel ad hoc". Ensure
the same mode is selected on the connected computer.
Enter when "ESSID ad hoc" under "Ad hoc mode settings"
is selected.
Enter the ESSID used for ESSID ad hoc mode. The initial
value is "EPSON."
Enter up to 16 (single-byte) alphanumeric characters.
Ensure that the same string is entered on the connected
computer.