Grundig GIEH 823470 Handbuch Seite 66

Operation
The suction surface is designed
to be used in combination with a
Window sensor KIT (not provided
by the manufacturer) When install-
ing the Windows sensor KIT (only
in the case of use of the surface in
SUCTION mode), the suction will
stop operating every time when
the KIT which with the surface is
equipped detects that the win-
dow is closed in the room where
it is installed. It is recommended
the purchase of the FDS KIT - 100
Elektrotechnik
able at authorised Elektrotechnik
Schabus centres or directly on the
Internet site
www.elektrotechnik-schabus.de.
- The electrical connection of the
suction surface KIT must be car-
ried out by qualified and specialised
technical personnel.
- The manufacturer of the suction
surface declines all responsibility
for any inconvenience, damage or
fire caused by defects and/or prob-
lems of malfunctioning and/or in-
correct installation of the KIT.
Schabus, avail-
ENG
DE
DA
NO
SV
FI
PL
CS
SK
IT
RO
NL
FR
69