Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BML-S1G0-_7_ _-M5EG-_0(-SA42)-_ _
Absolute magnetic encoder system
1
Notes to the user
1.1
Validity
This guide describes the construction, function and
installation options for the BML absolute magnetic encoder
system.
It applies to the following models with linear, rotational and
arched application (see Type code on page 34):
–
BML-S1G0-B/S/M7_ _-M5EG-_0-KA_ _
–
BML-S1G0-B/S/M7_ _-M5EG-_0-S284
–
BML-S1G0-B/S/M7_ _-M5EG-_0-SA42-KA_ _
–
BML-S1G0-B/S/M7_ _-M5EG-_0-SA42-S284
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the
magnetic encoder system.
1.2
Symbols and conventions
Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3
Scope of delivery
–
Sensor head
–
Condensed guide
The magnetic tapes are available in different
versions and must be ordered separately.
For additional information about the interfaces
please refer to the document Interfaces for BML
Magnetic Encoder System.
www.balluff.com
1.4
Approvals and markings
UL approval
File no.
E227256
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The transducer meets the requirements of the following
product standard:
–
EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced by
high-frequency fields EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
Severity level 4
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 5
english
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
