Jackle JESS WELDING maxiMIG 250 Betriebsanleitung Seite 23

EN
Translation of the original operating instructions
The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these operating
instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes will, however,
be incorporated into subsequent editions of the operating instructions. All brand names and trademarks that appear in these operating
instructions are the property of their respective owners/manufacturers. The contact details for Jäckle & Ess System GmbH national
subsidiaries and partners worldwide are provided on our website at www.jess-welding.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Responsibilities of the user
2.3 Personal protective equipment
2.4 Classification of the warnings
2.5 Product safety
2.6 Warning and notice signs
2.7 Emergency information
3 Product description
3.1 Technical data
3.2 Ambient conditions
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Mains port
6.2 Welding
7 Operation
7.1 Control elements
7.1.2 maxiMIG 250
7.1.3 maxiMIG 300
7.1.4 Description of symbols
7.2 Wire feeder
7.3 Replacing the wire feed roller
7.3.1 Wire spool brake
7.3.2 Wire guiding in the welding torch cable assembly
EN-13
8 Maintenance and cleaning
9 Troubleshooting
10 Appendix
10.1 Spare parts
10.2 Circuit diagram
EN - 1
EN-1
EN-1
EN-1
EN-1
EN-1
EN-1
EN-1
EN-2
EN-2
EN-2
EN-3
EN-3
EN-4
EN-4
EN-5
EN-5
EN-5
EN-5
EN-6
EN-7
EN-8
EN-8
EN-9
EN-9
EN-10
EN-11
EN-12
EN-12
EN-12
EN-12
EN-13
EN-14
EN-15
EN-15
EN-23
maxiMIG 250/300
BA-0005 • 2020-10-19