System Settings; Alarm Clock; Set Up Alarm Clock 1 - Imperial DABMAN 14 Bedienungsanleitung

9. SYSTEM SETTINGS

9.2 Alarm clock

The alarm clock will switch the DABMAN 14 on at the set alarm time. 2
alarm times can be programmes. How to set the alarm clock 1 is given as
an example. For the alarm clock to work, the DABMAN 14 must be sup-
plied with power by the power supply unit. The alarm function is disabled in
battery mode.

9.2.1 Set up alarm clock 1

> In the submenu [System] use the button <Tune or Tune> to
select [Alarm].
E
> Press the Select button.
Use <Tune or Tune> to select the alarm
>
you want to set. So [alarm 1] in this example and then press the
Select button once more.
[Alarm 1 Setup] appears on the display.
Press the Select button to start the setup.
>
> The display shows [Time On 06:00] with the first digit flashing.
You can now enter a new time for the alarm. First select the hours with
the <Tune, Tune> buttons and press the Select button to apply the
changes.
Then the minutes are entered. Adopt these changes with the
Select button as well.
> Then enter the duration with <Tune, Tune>.
Then adopt this entry by pressing the Select button.
> Then enter the source. BUZZER, DAB and FM are always
available.
To adopt these settings press the Select button. If you have
>
selected DAB or FM, you can then specify whether you want
to be woken up with the last station you listened to, or by one of
your set favourites.
> The next step is the alarm repetition. You can choose
between daily (every weekday), once, week days (Mon-Fri) or
weekends (Sa and Sun).
> To adopt the settings press the Select button.
OPERATING MANUAL 70