Automatic Time Update; Set The Time Format; Set The Date Format - Imperial DABMAN 14 Bedienungsanleitung

9. SYSTEM SETTINGS
> Proceed as described above to set the date.
> After all settings have been made and
the Select button was pressed for the last time,
[Time saved] appears in the display.

9.3.2 Automatic time update

In this submenu you can specify whether the time is to be automatically
updated via DAB+ or FM (UKW) or entered manually (section 9.3.1).
In the submenu [System] use the button <Tune or
>
Tune> to select [Time] and press the Select button.
E
Use <Tune or Tune> to select [Autom. update] and press Select.
>
> Use the <Tune or Tune> and Select buttons to choose
the following options:
[Update all] (update via DAB+ and FM) [Update by DAB] (Update only via
DAB+) [Update by FM] (Update only via FMW) [No update] (Time/date
must be entered manually, see section 9.3.1).

9.3.3 Set the time format

You can activate the 12- or 24-hour format in the 'Set 12/24-hour time'
submenu.
> In the Clock/time submenu, select [Set 12/24 Hrs] with the
<Tune or Tune> buttons and press Select.
> Use the <Tune or Tune> buttons to choose one of
the following options:
[set it at 24 hrs.]
[set it at 12 hrs.]
> To adopt the change press the Select button.

9.3.4 Set the date format

In the Clock/Time submenu 'set date format' you can set the format for
displaying the date.
> In the Clock/time submenu, select [Set 12/24 Hrs] with the
<Tune or Tune> buttons and press Select.
Use the <Tune or Tune> buttons to choose one of the following
>
options:
OPERATING MANUAL 72