Handling And Use; Charging Mobile Devices With The Power Bank - Silvercrest SPPB 5000 A1 Bedienungsanleitung

Handling and use

Charging mobile devices with the power bank

♦ Insert the micro-USB plug on the charging cable
micro-USB charging port on the mobile device, and insert
the USB plug into the USB port
♦ Press the ON/OFF button
NOTE
► After removing the lighting attachment
of charging a second device parallel to the first one. Keep in
mind that the capacity of the power bank diminishes faster
and the charging times become longer.
CAUTION
► If you charge two mobile devices simultaneously at the USB
ports (
mobile devices must not exceed 2.1 A.
♦ Press the ON/OFF button
the charging process at the USB port
♦ During the charging process, the current charge level of the
power bank is shown via the charge level LEDs
in the section "Checking the charge level").
♦ To stop charging, disconnect the charging cable
mobile device and the power bank. The charge level LEDs
switch off after about 30 seconds.
■ 10
│
GB│IE│NI
+ ), the total power consumption of the two
on the power bank.
to start the charging process.
, you have the option
for approx. 3 seconds to start
.
into the
(see table
from the
SPPB 5000 A1