Operation And Use; Charging The Power Bank - Silvercrest SCP 10000A1 Bedienungs- Und Sicherheitshinweise

Immediately switch the product off and remove the charging
cable from the product if you smell burning or see smoke.
Have the product examined by a qualified technician before
using it again.
If you use a USB power supply, the socket used must always
be easily accessible so that the USB power supply can
be quickly removed from the socket in the case of emer-
gency. Please also refer to the manufacturer's instruction
manual.
Observe the usage restrictions and prohibitions of use for
battery-operated products in situations which may be haz-
ardous such as at petrol stations, airports, hospitals, etc.
WARNING! During charging process, please be
noticed that the product must not be covered. There is a
risk of warming and overheating.

Operation and use

Charging the power bank

The built-in rechargeable battery must be fully charged before
using the product.
To charge the power bank
with an output voltage of 5 V and an output current of
at least 3 A.
ATTENTION! Due the high power consumptions, the
power bank must not be charged from a PC or notebook.
Connect the USB type A to micro USB cable with
adapter to USB type C
the power bank
can also be used for charging the power bank. In this
case, the micro-USB-USB type C adapter must be re-
moved from the cable.
26 GB/IE
only use power supplies
6
with the USB-C Input
7
. Alternatively, the micro-USB input
6
of
3
2