Operation And Use; Charging The Power Bank - Silvercrest SLIM SPUP 3 B2 Bedienungs- Und Sicherheitshinweise

Have the product examined by a qualified technician be-
fore using it again.
If you use a USB power supply, the socket used must al-
ways be easily accessible so that the USB power supply
can be quickly removed from the socket in the case of
emergency. Please also refer to the manufacturer's in-
struction manual.
Observe the usage restrictions and prohibitions of use
for battery-operated products at places which may be
hazardous such as at petrol stations, aircrafts, hospitals, etc.
WARNING! During charging process, please be
noticed that the product must not be covered. There is a
risk of warming and overheating.

Operation and use

Charging the power bank

The built-in rechargeable battery must be fully charged
before using the product.
To charge the power bank
with an output voltage of 5 V and an output current of
at least 3.0 A.
ATTENTION! Due the high power consumptions, the
power bank must not be charged from a PC or notebook.
Connect the USB type A to micro USB cable
micro USB input
Connect the other end of the USB type A to micro USB
cable (USB type A) to a USB power supply (not in-
7
cluded in the scope of delivery) (see fig. B).
only use power supplies
1
of the power bank
3
with the
7
.
1
GB/IE 29