Operation And Use; Charging The Power Bank - Silvercrest SPBL 6000 A1 Bedienungs- Und Sicherheitshinweise

Operation and use

Charging the power bank

Because of this power bank high current con-
sumption, never use a notebook or PC USB port
to charge the power bank.
Only use a suitable USB power adapter for
charging this power bank (5 V
not supplied).
The built-in rechargeable battery must be fully charged
before using the product.
To charge the power bank
supplies with an output voltage of 5 V and an
output current of at least 2 A.
Connect the USB cable
input port
Connect the other end of the USB cable
(USB Type A) to a USB power supply (not in-
cluded in the scope of delivery) (see fig. C).
The current battery status is shown by LED
display
* This is approx percentage of power bank capacity
but not actual measurement.
32 GB/IE
of the power bank
3
during the charging process.
5
, min. 2 A;
only use power
1
with the Micro-USB
6
.
1
6