Operation And Use; Charging The Power Bank - Silvercrest SPBP 4 A2 Bedienungs- Und Sicherheitshinweise

Immediately switch the product off and remove the charg-
ing cable from the product if you smell burning or see
smoke. Have the product examined by a qualified techni-
cian before using it again.
If you use a USB power supply, the socket used must al-
ways be easily accessible so that the USB power supply
can be quickly removed from the socket in the case of
emergency. Please also refer to the manufacturer's instruc-
tion manual.
Observe the usage restrictions and prohibitions of use for
battery-operated products in situations which may be haz-
ardous such as at petrol stations, airports, hospitals, etc.
WARNING! During charging process, please be
noticed that the product must not be covered. There is a
risk of warming and overheating.

Operation and use

Charging the power bank

The built-in rechargeable battery must be fully charged before
using the product.
To charge the power bank
with an output voltage of 5 V and an output current of
at least 3.0 A.
ATTENTION! Due the high power consumptions, the
power bank must not be charged from a PC or notebook.
Connect the USB type A to micro USB cable with
adapter to USB type C
the power bank
Connect the other end of the USB type A to micro USB
cable with adapter to USB type C
USB power supply (not included in the scope of delivery)
(see fig. B).
only use power supplies
6
with the USB-C Input
7
.
6
3
(USB Type A) to a
7
of
GB 11