Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Performance-Gewindefahrwerke
Performance Coilover Kits
Kit-Nr.: PSM69-48-002-01-22
Installation Instruction Heinrich Eibach GmbH
Before you start installation work, please read the following carefully:
Ensure that the TÜV certificate matches the vehicle specifications (front and rear axle weights,
vehicle identification number (VIN) etc...)
The suspension components must match the suspensions application specifications (springs and
shock/struts identification numbers).
The instructions have to be strictly observed.
General notes
Important general product and user information about original Heinrich Eibach GmbH
suspension kits
Eibach suspension components are designed for sports-oriented driving, and generally feature
progressive characteristic curves. The resulting drop in the vehicle's center of gravity is usually termed
"lowering". The lowering values specified by the TÜV (German Technical Inspection Agency) refer to
the difference between the vehicle height listed in its registration document and the height from the
ground to the upper edge of the roof following successful installation. To make sure your measuring
values are consistent, please take into account the influences of the wheel/tire combination, shock
absorber type and condition, and fuel level, as well as the previous standing height tolerances.
Because of these potential external effects on the dimensions, we cannot assume any guarantee for
the degree of lowering.
Heinrich Eibach GmbH makes many different suspension components, and some of them are very
similar to others. If you install and use components in vehicles for which they are not designed, serious
damage and personal injury may result. Before installation, therefore, compare the TÜV certificate and
the vehicle documentation to determine whether all references are correct and this Heinrich Eibach
GmbH kit is the right one for your vehicle.
This also applies to wheels and tires that have not been authorized by the manufacturer. Carefully
read the information about vehicle type and model in our TÜV certificate and type lists. If there is any
doubt as to whether a product is suitable for your vehicle, contact your Heinrich Eibach GmbH dealer
or a qualified (authorized) workshop.
Important installation information about original Heinrich Eibach suspension kits
Non-professional installation and removal of Eibach suspension components can lead to material
damage and personal injury. Therefore we recommend that you have these components installed by a
qualified vehicle workshop with the necessary equipment.
Hinweis Nr.
1798000811
Instruction No.
E694800201
Erstellt am:
26.03.2019
Date:
Seite 34 von 42
Page 34 of 42
Werbung
