Deleting A User From The System - eKey TOCAhome integra Bedienungsanleitung

English
®
2.6. For ekey
panel is equipped with 1 relay.
®
2.7. For ekey
relay to be activated by the selected finger.
Entering relay: "o1" is visible in the display of the control panel.
Select the desired relay by using the keys < or > and press the OK key.
Now "EF" will appear in the display.
3. ENROLLING FINGER
3.1. Once "EF" (enrol finger) is visible in the display of the control panel, you have
60 seconds to swipe your finger over the sensor, starting from the first finger
joint.
3.2. The enrolment should be done as described in chapter 4.4.
3.3. The scanner is equipped with a status display (LED), which indicates the
operating mode:
Red:
Orange:
Green:
4.6

DELETING A USER FROM THE SYSTEM

1. ENTERING THE SECURITY CODE
1.1. Press the OK-key in the control panel.
1.2. Enter the first digit of the security code using < and > (standard setting is 9)
1.3. Press the OK-key.
1.4. Enter the second digit of the security code using < and > (standard setting is 9)
1.5. Press the OK-key.
1.6. In the display "Eu" (enrol user) is visible.
2. DELETING A USER
2.1. Press the >-key until "du" (delete user) is visible in the display of the control
panel.
2.2. Press the OK-key.
2.3. Press the < or >-key to select the user ID to be deleted from the system.
2.4. Confirm the user ID to be deleted by pressing the OK-key.
2.5. In the display of the control panel, "OK" will be visible for a short moment and
the system will return to the standard operating mode.
TOCAhome, the display shows "EF" (enrol finger), as the control
TOCAhome 3 and ekey
The finger could not be scanned successfully
please try again!
The device is waiting for a finger to be scanned.
Successful scan
®
TOCAhome pc, you can now select the
23