Changing The Security Code; Resetting To Factory Settings - eKey TOCAhome integra Bedienungsanleitung

English
4.7

CHANGING THE SECURITY CODE

Please note that without the security code you are unable to operate the system. If the
wrong security code is entered 3 times, the system will be disabled for 30 minutes.
1. ENTERING THE CURRENT SECURITY CODE
1.1. Press the OK-key in the control panel.
1.2. Enter the first digit of the security code using < and > (standard setting is 9)
1.3. Press the OK-key.
1.4. Enter the second digit of the security code using < and > (standard setting is 9)
1.5. Press the OK-key.
1.6. In the display "Eu" (enrol user) is visible.
2. DEFINING A NEW SECURITY CODE
2.1. Press the >-key until "sc" is visible in the display of the control panel.
2.2. Press the OK-key.
2.3. Enter the new first digit of the security code using < and >.
2.4. Press the OK-key.
2.5. Enter the second digit of the security code using < and >
2.6. Press the OK-key.
2.7. In the display of the control panel, "OK" will be visible for a short moment and
the system will return to the standard operating mode.
4.8

RESETTING TO FACTORY SETTINGS

When resetting the system to the initial factory settings, all data from the
system is deleted. The security code is reset to the factory default "99" and
the scanner and control panel loose their coupling.
1. ENTERING THE CURRENT SECURITY CODE
1.1. Press the OK-key in the control panel.
1.2. Enter the first digit of the security code using < and > (standard setting is 9)
1.3. Press the OK-key.
1.4. Enter the second digit of the security code using < and > (standard setting is 9)
1.5. Press the OK-key.
1.6. In the display "Eu" (enrol user) is visible.
2. RESETTING TO INITIAL STANDARD SETTING
2.1. Press the >-key until "sc" is visible in the display of the control panel.
2.2. Press the OK-key.
2.3. Enter the first digit of the security code using < and > (standard setting is 9)
2.4. Press the OK-key.
2.5. Enter the second digit of the security code using < and > (standard setting is 9)
2.6. Press the OK-key.
24