Overview Programming Menu - eKey TOCAhome integra Bedienungsanleitung

English
Press the OK button and then the ESC button. EF appears on the display, which stands
for Enrol Finger. Now the finger already recorded can be drawn across the sensor to start
the initialisation process without losing any data (important after the scanner panel has
been replaced). If no fingers have been recorded to date (new installation), press the
ESC key to terminate the initialisation process.
The initialisation process is fully automated. The devices are automatically coupled with
each other to prevent unauthorised replacement of the control panel or unauthorised
access. The blinking decimal point in the scanner panel signals normal operation after the
initialisation process has completed. The security code is set to a default value of 99.
Please change this value as soon as possible to a security code of your own choice.
4.3

OVERVIEW PROGRAMMING MENU:

21