Qi Wireless Charging - Silvercrest SQWP8000 1A1 Bedienungs- Und Sicherheitshinweise

Briefly press the ON / OFF button
indicator
6
battery in percent for approx. 30 seconds.
1 LED lights up
2 LEDs lights up
3 LEDs lights up
4 LEDs lights up

Qi wireless charging

Put your Qi compatible device to be charged on the centre of
the Qi charging surface
Charging starts automatically when the Powerbank is switched
on. When Qi charging is active, Qi status indicator
green.
Slightly adjust the charging position of the device to be charged
so that its charging surface is facing down to the centre of the Qi
charging surface
If wireless charging does not start, move your device to be
charged more accurately to the centre of the Qi charging
surface
7
While in idle status (standby mode), the Qi status indicator
will illuminate amber in colour.
When the charging process has finished the Qi status indicator
4 will still illuminate green in colour*.
The Qi status indicator
power bank cannot detect any Qi charging device on the Qi
charging surface
device to be charged towards the center of Qi charging surface
in order to start wireless charging.
7
shows the approximate charge status of the internal
7
of the power bank
7
.
4
. In this case, move your Qi compatible
7
. The battery status
5
=
=
=
=
of the power bank
also shows quick flashing when the
25 %
50 %
75 %
100 %
.
8
4 lights
.
8
GB/IE 33
4