Troubleshooting - Silvercrest SQWP8000 1A1 Bedienungs- Und Sicherheitshinweise

Or simply double click the ON / OFF button
bank will switch off.
8
NOTE:
If you use both USB ports, a voltage of 5 V will be output at both
outputs. The maximum output current must not exceed 3 A for both
outputs.
P Troubleshooting
= Problem
= Cause
= Solution
It may not be possible to charge a Qi compatible
device.
The mobile device is already fully charged.
Take away the fully charged device for use, until its internal
battery was drained again. Then put device back to Qi charging
surface 7
The mobile device has become very hot as a result of charging.
Remove the mobile device from the wireless charging surface
7 for a few hours to let it cool down, and also check if your
product was damaged.
This product is in a location where strong radio waves or noise
is being generated, such as TV towers, electric power plants, or
gas stations.
Under this environment, use other output port, such as USB Type
C or Type A port for charging up your mobile device.
The power bank
It may be that the power bank is not connected properly.
Check that it is connected.
for charging.
is not being charged.
8
. The power
5
GB/IE 35