Charging The Power Bank - Silvercrest SPT 5200 A1 Bedienungsanleitung

Charging the Power Bank

Before using the Power Bank, the integrated battery
must be fully charged .
CAUTION
► Use the device only in dry interior rooms .
► The Power Bank must never be charged and
used for charging an external device at the
same time .
► Due to the high current consumption, the power
bank must be charged using a USB mains
adapter . Do not charge the power bank via the
USB port of a PC or notebook .
► Use only a USB mains adapter with an output
voltage of 5 V and an output current of at least
2 .1 A to charge the power bank .
► Use only the supplied charger cable 6 to
charge the power bank!
► Always disconnect the charger cable 6 when
charging is complete!
♦ Connect the USB plug of the charger cable 6 to
a suitable a USB mains adapter (not supplied) .
♦ Connect the microUSB plug of the charging cable
6 to the microUSB charging port 2 on the
Power Bank . An estimate of the charge level is
shown by means of the charge level LEDs 4 .
■ 60 │ GB │ MT
SPT 5200 A1