ASSEMBLY
Step 3
•
Connect exposed end of wire through console rear cover support (11) with console(2), then use
semicircular head cross flower screwM5*12(A88) and pad Φ5(A87) to fix console(2) on the handle
adjustment(8);
•
use flat countersunk head cross flower self-taping screw ST3.5*12(A86) to fix console rear cover
support (11) on the console (2),
•
then use nylon mat S1151(A14), washerΦ 5(A87), spring washerΦ5(A15), semicircular head cross
flower screw M5*16(A13) to fix bottle cage (3) on the handle adjustment (8);
•
adjust handle adjustment(8) to the following position, then use flat countersunk head inner hexagon
screw M8*16 (A10) (not in the plastic-absorbing tool plate, already assembled with handle adjust-
ment (8) to fix handle (7)on the handle adjustment(8);
•
at last screw tightly pedal (10) on the crank. (please attention on left (L) pedal and right (R) pedal
and screw tightly in the direction of the front of bike
54