Kessel Comfort PLUS Einbau- Und Betriebsanleitung Seite 41

3.2 Profile memory
3.3 Date/Time
3.4 System configuration
3.5 Product type
3.6 System variant
010-700_04
3.1.8 Sensor height
3.1.9 SDS Self diagnosis system
3.1.10 Sensing zone level probe
3.1.11 ON 1 level
3.1.12 OFF 1 level
3.1.13 ALARM - level
3.1.14 ON 2 level
3.1.15 OFF 2 level
3.1.16 On delay flap
3.1.17 Post run time flap
3.1.18 Max. current flap
3.1.19 S1/S3 pump operation
3.1.30 Access Remote Control
3.2.1 Save parameters
3.2.2 Load parameters
3.5.1 Pumpfix / Ecolift XL Mono
3.5.2 Pumpfix / Ecolift XL Duo
3.5.3 Lifting station Aqualift Mono
3.5.4 Lifting station Aqualift Duo
3.5.5 Pumping station Aqualift Mono
3.5.6 Pumping station Aqualift Duo
3.6.1 1 motorised flap
3.6.2 2 motorised flaps
3.6.5 F Compact
3.6.6 F
3.6.7 F XL 200l
3.6.8 F XL 300l
3.6.9 F XL 450l
3.6.10 S underfloor
3.6.11 Special lifting station Mono
3.6.12 F Compact Duo
3.6.13 F Duo
3.6.14 F XL 200l Duo
3.6.15 F XL 300l Duo
3.6.16 F XL 450l Duo
3.6.17 S Underfloor Duo
3.6.18 S Duo
3.6.19 Special lifting station Duo
3.6.20 F XL Mono (ATEX)
3.6.21 S Mono
3.6.23 F AP 501 Mono LW 800
3.6.24 F AP 501 Mono LW 1000
3.6.25 F (without ATEX)
3.6.26 S chamber module LW 600 Mono
3.6.27 S chamber module LW 1000 Mono
3.6.28 Special pumping station without
ATEX
3.6.29 Special pumping station ATEX
3.6.30 FXL Duo (ATEX)
Installation and operating instructions
mm 0 - 5000
mm 0 - 9999
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
mm 0 - 5000
s 0 - 99
s 0 - 99
mA 150 - 200
41 / 148