Pairing/unpairing the headphones with a
®
Bluetooth
Before you can use the headphones with the Bluetooth
you must pair them with a compatible Bluetooth
♦
Switch on the headphones as described above to activate
pairing mode.
♦
Set the Bluetooth
Bluetooth
can be found in the operating manual for your Bluetooth
playback device.
Select the entry SKHO 40 A1 from the list of devices found
♦
on your Bluetooth
the code 0000 to connect the two devices. If the pairing
is successful, you will hear a rising series of beeps and the
operating/charging LED
intervals.
♦
To terminate the Bluetooth
Bluetooth
or hold down the Bluetooth
2 seconds until the operating/charging LED
and blue alternately. The headphones are now in pairing
mode again.
♦
Alternatively, switch the headphones off as described above
to deactivate the Bluetooth
│
GB │ IE
■
38
device
playback device so that it scans for
®
devices. A detailed description of how to do this
®
playback device and, if required, enter
®
function on the Bluetooth
®
0
flashes blue twice at 3-second
connection, either disable the
®
pairing button
®
function.
®
function,
®
device.
®
playback device
®
6
for about
0
flashes orange
SKHO 40 A1
®