Connecting The Headphones To A Second Bluetooth ® Device - Silvercrest SBK 40 A1 Bedienungs- Und Sicherheitshinweise

If you come into range of the paired device with the headphones
switched on, a Bluetooth
tablished.
You may need to approve the connection on the communication
device. Please refer to the instructions for use of the communi-
cation device on this topic!
If you leave the range of your communication device with your
headphones, the LED
If the connection is not restored within 5 minutes, the head-
phones will switch off.
The headphones may be manually switched off by holding the
button
7
the LED
4
Connecting the headphones to
a second Bluetooth
The headphones may be connected to two Bluetooth
tion devices at the same time. If the headphones are already con-
nected to a device, follow the steps below to connect to the second
device:
Activate multipoint mode by pressing and holding
for approx. 3 seconds. Acoustic signal sounds. The first
8
connection will automatically be es-
®
will flash blue once every 2 seconds.
4
for 3 seconds until acoustic signal sounds and
goes out.
device
®
communica-
®
button
GB/IE/NI 19